CIBSE Domestic Heating Design Guide (2026) — what’s changed and why it matters

If you’re comparing heating quotes, ask each installer the same question: what water temperature will the system need to keep every room warm on a cold day? The answer ties together the heat loss of your home, the size of your radiators and the way the system will be controlled. It also gives you something more useful to compare than the make and model on each quote.

The Chartered Institution of Building Services Engineers (CIBSE) launched the 11th edition of its Domestic Heating Design Guide in January 2026. It covers space heating and domestic hot water. CIBSE issued version 2026-02 in July, replacing the January release, and advises readers to use it alongside the published corrections. CIBSE guide and corrigendum

What’s changed in the 2026 guide?

Design areaWhat CIBSE has updated
Heat lossUpdated weather data and U-value tables, with a calculation method aligned with BS EN 12831-1:2017.
Hot waterRevised cylinder sizing guidance aligned with BS EN 12831-3:2017.
ControlsMore detail on choosing a control strategy and handling systems that need different water temperatures.
Pipework and heat deliveryExpanded coverage of heat emitters, circulation pumps and ways to arrange the pipework.
Design recordsA System Criteria Document to record what the system is designed to do, the decisions behind it and who is responsible.

CIBSE guide overview

Start with the room that’s hardest to heat

Picture a back bedroom with two outside walls and an existing radiator under the window. The radiator may heat the room well with the current boiler settings. If you plan to run the new system at a lower water temperature, that same radiator will give out less heat. The room-by-room calculation tells you how much heat the bedroom needs. The radiator check tells you whether it can deliver that heat at the proposed temperature.

This is where the detail in a quote matters. One designer might be able to keep most of the radiators and change one or two. Another might show that planned insulation would reduce the demand enough to keep an existing radiator. If the insulation is going in later, ask how the heating will perform in the meantime.

The System Criteria Document makes the design traceable

The System Criteria Document gives the designer a place to record the assumptions and decisions that shape the job. CIBSE describes it as a way to support commissioning and encourages sign-off by the designer and client. CIBSE launch announcement

In practice, think about what happens when an installer changes a specified radiator because the original is out of stock. A clear record gives the team a basis for checking the replacement against the room’s heat loss and the intended water temperature. The person commissioning the system can then work from the design that was actually installed.

Five questions to ask before accepting a heating quote

  1. Can I see the room-by-room heat loss? Ask which outdoor temperature was used and what the designer assumed about the insulation, windows and ventilation.
  2. What flow temperature are you designing for? This is the temperature of the water leaving the heat source for the heating circuit. Ask how it was chosen.
  3. Which radiators can stay? Ask for the output of the existing and proposed radiators at the design temperatures.
  4. How have you allowed for hot water? If the design includes a cylinder, ask how its size and recovery time suit your household’s usual demand.
  5. What will I get at handover? Ask for the final design information, commissioning records and an explanation of the controls you’ll actually use.

Which CIBSE guide should you look for?

The Domestic Heating Design Guide is the broader reference for home heating and hot water design. CIBSE and the Heat Pump Association UK also published a dedicated Domestic Heat Pump Design and Installation Guide in October 2026, focused on monobloc air-to-water heat pumps in new and existing homes. CIBSE heat pump guide


Helping with the retrofit puzzle

Plan the whole home, not just one measure.

Explore practical guidance on insulation, heating, ventilation, controls and renewable technologies.